Share

5 Steps to Adding a Top-stitched Casing


Add a casing and tie belt to the waist of your dress, old or new, and ta-da, you have a new look!

Simply top-stitch a casing to the right side of the dress, insert a shoelace, rope, or skinny belt and you're done!

You can do this to pretty much any pattern, with or without a waist seam.

You do want the dress to be a little loose at the waist so that you get a few gathers when the belt is tied. I did mine on The Allie Dress.

Top-stitched casing: Step 1

Figure out where you want the casing to be attached.

If your dress does not have a waist seam you may want to put the dress on to figure this out. Make a mark at the side seam about where you would like the belt to be.

Now, measure from that mark to the underarm seam. The measurement I had was 5.5 inches.

Now take 1/2 inch off and make a mark there. Do the same to the other side seam. I used my favorite Frixion pens for all my markings.

Now take a long ruler such as a yard/meter stick and draw a straight line across the front matching the marks you just made.

This is what I did on my dress. I wanted the belt to be just above my waist.

Top-stitched casing: Step 2

Next, flip the dress over and transfer the marks at the side seams to the back and draw a line across the back.

Now fold the dress in half, matching the side seams, and mark the center front and center back. My dress had a seam down the center back so I only marked the center front.

For this design, the casing is to be sewed on a little back from center front so I marked 1.5 inches on each side of the center front. This is where the ends of the casing will come up to.

Now place your measuring tape on the mark 1.5 inches from the center and then measure all the way around and up to the other mark 1.5 inches from the center.

Then add 1/2 inch and that is how long your casing piece needs to be. Cut the casing that long and 1.5 inches wide.

Top-stitched casing: Step 3

Next hem the ends of the casing piece 1/4 inch and sew close to the edge.

This shows the wrong and right sides of the hemmed casing ends.

Now fold the long edges of the casing piece 1/4 inch to the wrong side and iron. I just eyeballed that part and didn't measure. Do what works best for you.

Before pinning the casing to the dress mark the center of the casing by folding it in half and making a mark at the fold.

You can also make marks on the casing to match to the side seams by measuring from the front end mark to the side seam and transferring that measurement to the casing piece.

This makes it so much easier to pin the casing on evenly.

Top-stitched casing: Step 4

Now you are ready to pin! Starting at the front pin the top edge of the casing along the line and pin just that edge matching the marks to the side seams and center back.

Top-stitch close to the edge all the way around. Repeat on the bottom edge.

Top-stitched casing: Step 5

Now you are ready to thread your tie through the casing! The tie I started out with I braided some jute twine but I have a feeling it won't go through the washer very well so I think I'll just use a shoelace. Use a bodkin, loop turner, or safety pin to thread the tie through.

And you are finished!

What are your "go to" ideas for sprucing up a plain pattern? Let me know!

By: Cheryl

FREE Dress Pattern

Where should we send the pattern?

Get on the waitlist

Cutting Out Sewing Pattern on Fabric

Cutting out a pattern from fabric is the first, most important step of the sewing project. It’s so important because it’s where everything starts and determines the end result. Before cutting out a sewing project you first need to prepare your pattern and fabric, then lay out the pattern to ensure the pieces fit and

Read More

Improve Your Morning Routine : Customized For You

Morning routines are such a great way to get the day started. But what if it just doesn’t feel like the routine you have is working? It worked when you started but for some reason it’s not working now. It doesn’t bring satisfaction, it doesn’t accomplish what it used to, and it just feels like

Read More

Easy Time Saving Tips for Dressmaking

How can I save time when sewing? How can I get sewing done but not take so much time with it? To save time in sewing begin by pre-washing fabric, collecting all supplies together ahead of time, and removing distractions. This prepares you for the best sewing experience, besides other successful strategies for sewing efficiently.

Read More

Why Sew? : Special Benefits of Sewing Your Own Clothes

When it comes to sewing your own clothes, some of the benefits seem like a no-brainer while other benefits require some digging to find them. I had to dig a bit to find some of the benefits because I have been sewing my own dresses and other things for most of my life. Sewing your

Read More

Sewing Tools : 5 Most Used in Sewing Dresses

Sewing a dress is so much easier with the right tools. And the right tools aren’t necessarily so fancy or complicated. The most used sewing tools in sewing dresses are basically, but not limited to, a pair of scissors, stick pins, and a tape measure. These tools ensure an efficient sewing experience as well as

Read More

How to Plan a Menu for a Week : Menu Plan 3 Ways

It’s an hour before mealtime and you don’t know what you are going to cook. A half hour goes by and your mind is still a blank. Now panic starts to set it. WHAT to cook? Make a plan. It’s that simple. Truly. A menu plan for the week. The simplest way to create a

Read More

Sewing Your Dress

6 important steps to get started

Where should we send your FREE checklist?